**Instructions for Use of WILLIAM WEIR Wooden Care Wax**

 

Commodity code: 0369

 

duct Overview

 

WILLIAM WEIR wooden care wax is a product specially designed to protect and beautify wooden surfaces. It can effectively nourish wood, prevent drying and cracking, and at the same time give the surfaces of wooden furniture, floors, etc. a bright color and lasting protection.

 

II. Usage Methods

 

1. Preparation

– Ensure that the wooden surface is clean and dry. If there is dust or stains, first wipe it clean with a soft dry cloth.

– For older or severely worn wooden surfaces, you can first use sandpaper to gently sand and remove the rough parts before performing care.

2. Applying care wax

– Take an appropriate amount of wooden care wax on a clean soft cloth.

– Apply the care wax evenly on the wooden surface in a circular motion to ensure that every part is covered.

– For wooden products with carvings or complex patterns, a small brush can be used to apply the care wax to hard-to-reach areas.

3. Polishing

– Wait for the care wax to dry slightly (usually a few minutes to ten minutes or so, depending on the ambient temperature and humidity).

– Use a clean soft cloth to gently wipe the wooden surface in a straight line for polishing to make the surface present a smooth and shiny effect.

 

III. Precautions

 

1. Avoid using care wax in high temperature, direct sunlight or humid environments.

2. Keep away from fire sources. This product is flammable.

3. If it accidentally comes into contact with skin or eyes during use, immediately rinse with clean water and seek medical help.

4. Please store the product in a place where children cannot reach.

5. Different types of wood may react differently to care wax. It is recommended to test on an inconspicuous area first.