Car Pre-Wash

Features:This is a special pre-wash car wash solution designed specifically for vehicles with heavy sand, mud, cement stains and various types of tough dirt on the surface. Featuring a high-efficiency penetrating formula, it quickly penetrates beneath the dirt to soften stubborn stains and sediment, breaking down their adhesion. This fundamentally prevents paint scratches caused by hard particles during washing, laying a safe foundation for subsequent cleaning. It is an ideal choice for daily cleaning of vehicles with heavy contamination.

Main ingredients: Surfactants, acidic substances, penetrants, deionized water, etc.

Use method：First manually remove large debris from the car surface, keeping the body dry or slightly damp. Spray the pre-wash evenly from the bottom up, ensuring full coverage with no blind spots. Let it sit for 3–5 minutes to allow the active ingredients to fully penetrate and soften dirt. Then rinse with a high-pressure water gun starting from the roof, flushing downward along the body to the lower part until the pre-wash and loosened mud and sand are completely washed away.

Scope of application：Suitable for all kinds of motor vehicles including cars, SUVs, off-road vehicles, motorcycles and commercial vehicles.

Matters needing attention：It is recommended to wear gloves and goggles during operation to avoid direct contact of the undiluted solution with skin and eyes.

If the undiluted solution gets into eyes, rinse continuously for more than 10 minutes and seek medical attention promptly. Store sealed in a cool, dry and ventilated place, keep out of reach of children. Do not mix with alkaline cleaners to avoid chemical reactions that may affect effectiveness. For external vehicle cleaning only; strictly prohibited for interior use. This pre-wash solution is only used to soften and break down dirt. After pre-washing, clean with a dedicated car wash solution, then rinse thoroughly with clean water and dry.